CI-XT682 Online Nitrogen Oxide Analysis System
The probe is directly inserted into high temperature flue
gas (0~500°C) to measure NOx and O2;
No complicated pretreatment unit is required, the maintenance is small and it is not affected by other interfering gases, and the unique sensor working principle can prevent the influence of CO2, H2O and SO2 and other exhaust gases;
With automatic calibration function, it can automatically complete the calibration according to the cycle to improve the measurement accuracy;
The probe adopts a cast aluminum heater to control the Temperature of the probe at 100~180°C.
Principle: Double Cell Thick Film Zirconium Oxide Ion
Measuring Range: NOx 0~50/100mg/m3 (configurable)
O2 0~25.00%
Accuracy: NOX ±2%FS
O2 ±2%FS
Repeatability: NOx <2%
O2 ±1%FS
Zero Drift: NOx ±3%FS/7d
O2 ±1%FS/7d
Range Point Drift: NOx ±3%FS/7d
O2 ±1%FS/7d
Response time: NOx T90 <120s (after full preheating)
O2 T90 <60s (after full preheating)
Power supply: AC 100~240V, 50/60Hz
Consumption: <200VA
Working Temperature: Probe: Standard Type: 0~+500°C
High Temperature Resistant Type: 0~+700°C
Ultra-high Temperature Resistant Type: 0~+1200°C
System:-10~+50°C
Working Humidity: <80%RH
Storage Temperature: -20~+60°C
Storage Humidity: <90%RH
Remarks: Less dust, no smoke, no water vapor, and no corrosive gases
