Compact Dew Point Transmitter (CI-TM07)
CHANGAI new generation ultra-fast response aluminum oxide sensor
technology;
Application in dewpoint < -60 °Ctd:
Refrigerant dryers, desiccant dryers, industrial gases;
Accurate to ± 2 °Ctd with up to 9 dew point calibration and multi-point
temperature compensation;
Ultra-fast response time and outstanding long-term stability;
Anti-condensation, resistant to particulate contamination, oil vapor
and most chemicals;
High resistance to electrical disturbance;
IP65 protection class, providing good protection even in harsh environments;
Provides comprehensive sensor setup, data transfer, software;
upgrades, and maintenance via modbus RTU (RS485) interface and
powerful service APP;
Calibration is valid for two years, reducing maintenance;
Best price/performance ratio among most types of dewpoint meters in
the same measuring range.
Principle: Aluminium Oxide
Measuring Range:
CI-TM07: -80~+20 °Ctd
CI-TM07-2: -110~+20 °Ctd
Temperature: -40~+100 °C
Dew Point Accuracy: (Air or Nitrogen)
+20~+-60 °CTd: ±2 °Ctd
-60~-100 °CTd: ±3 °Ctd
Temperature Accuracy:
0~+50 °C: ±0.3 °C (standard)
-40~0 °C & +50~+100 °C: ±0.5 °C (standard)
Response Time: 63% [90%], reference: 20 °C, 1bar(a), 4L/min
-50 to +20 °Ctd: 20 sec [40sec]
+20 to -50 °Ctd: 1 min [3 min]
Power: DC 10~30V, Max 1W @ DC24V
Analog Output: 4~20mA (3 wire)
Analog Resolution: 0.002mA
Analog Drift: 0.01% of span/°C
Digital Output: Max 500 Ω
Digital Output: Modbus RTU (RS485)
Connector: 5pin M8, female
Operating Temperature: -30~+70°C
Storage Temperature: -40~+80 °C
Relative Humidity: 0~95% RH
Sample Gas Flow Rate: >1L/min
Pressure: 0~5MPa(a)
Process Connection:
ISO G1/2″ thread (standard)
3/4″ – 16 UNF thread (customized)
5/8″ – 18 UNF thread (customized)
Protection Code: IP65
Housing Material: SUS304
Sensor Filter: Stainless steel mesh filter (filtration class 70 µm)
EMC: Compliant with IEC 61326-1
